Transparent IEC 60870–5‑101 to IEC 60870–5‑104 gatewaySpain
- Project start: February 2014
- iGrid products involved: iGW-S2-SFP
- Number of RTUs/MV substations: More than 450 Substations
- Number of data points: Up to 10.000 I/O points/RTU
- Protocols: IEC60870‑5–104 and IEC60870‑5–101
iGW-S2-SFP acts as transparent gateway, without need to configure any data, only the communication parameters, between IEC 60870–5‑101 and IEC 60870–5‑104, using its RS-232 serial port and a FX100 Ethernet SFP connector or a 10/100BaseTX RJ45 connector.
This device has been chosen by the ENEL group in Spain to be installed on more than 450 high and medium voltage substations.
More Reference Projects
More solutions for smart grids, substations and energy plants
iGrid T&D’s SCADA, RTUs, substation gateways, protocol converters and bay controllers support both IEC61850 client and server communication capabilities. When acting as IEC61850 servers, our solutions are able to map any existing IED to IEC61850 logical devices
IEC61850, IEC60870‑5–104 and DNP3.0 (as well as other communication protocols) are used worldwide for substations’ automation. iGrid T&D solutions use all of them to have a completely interoperability with any other vendor
Our solutions fulfill the standards required by electrical companies for the control of Medium Voltage grids (MV/LV substations). Our devices are capable to adapt to different communication media (e.g. serial, Ethernet, GPRS/3G, PSTN) and able to handle multiple communication protocols (e.g. IEC60970‑5–104, DNP3.0)
Our smart metering solutions support the most popular metering protocols (IEC60870‑5–102, Modbus and DLMS) and multiple communication media. iGrid T&D is working with the most important meter manufacturers worldwide to collect and deliver metering information to the electrical market
Retrofitting electrical facilities means to use the newest devices together with the oldest ones. For these projects, flexible and adaptable protocol converters are vital devices.
Hydroelectric generation plants require remote control following the electrical systems standards, but a higher degree of automation is requested, as special procedures are requested for actions like dams open/close, generator start/stop, etc. iGrid solutions will give you easy tools to automate small and big hydroelectric generation plants
Basic information about our data protection:
Institution in charge: IGRID SL. Purposes of data processing: Customer contact. Archived data location: Raiola Networks SL (UE). Personal data retain period: Until removal request. Rights: You can exercise your rights of access, rectification, cancellation and opposition.