IEC61850 to IEC 60870–5‑104 HV SubstationIndia
- Project start: October 2013
- Project completion: December 2013
- iGrid products involved: iControl – Substation Edition and iRTU
- Number of RTUs/MV substations: 1 HV substation
- Number of data points: Up to 4.500 I/O points/substation
- Protocols: IEC61850 and IEC60870‑5–104
Both, iRTU and iControl products, are being tested under real conditions in a pilot plant in India.
During the first stage of the pilot project, the iRTUs read the data from the IEDs with IEC 61850, mapped it to IEC60870‑5–104, and then sent it to a remote iControl SCADA with IEC 60870–5‑104.
In the second stage of the project, IEC 61850 is also being used to send information.
More Reference Projects
More solutions for smart grids, substations and energy plants
iGrid T&D’s SCADA, RTUs, substation gateways, protocol converters and bay controllers support both IEC61850 client and server communication capabilities. When acting as IEC61850 servers, our solutions are able to map any existing IED to IEC61850 logical devices
IEC61850, IEC60870‑5–104 and DNP3.0 (as well as other communication protocols) are used worldwide for substations’ automation. iGrid T&D solutions use all of them to have a completely interoperability with any other vendor
Medium Voltage Distribution grid automation
Our solutions fulfill the standards required by electrical companies for the control of Medium Voltage grids (MV/LV substations). Our devices are capable to adapt to different communication media (e.g. serial, Ethernet, GPRS/3G, PSTN) and able to handle multiple communication protocols (e.g. IEC60970‑5–104, DNP3.0)
Our smart metering solutions support the most popular metering protocols (IEC60870‑5–102, Modbus and DLMS) and multiple communication media. iGrid T&D is working with the most important meter manufacturers worldwide to collect and deliver metering information to the electrical market
Retrofitting electrical facilities means to use the newest devices together with the oldest ones. For these projects, flexible and adaptable protocol converters are vital devices.
Hydroelectric generation plant
Hydroelectric generation plants require remote control following the electrical systems standards, but a higher degree of automation is requested, as special procedures are requested for actions like dams open/close, generator start/stop, etc. iGrid solutions will give you easy tools to automate small and big hydroelectric generation plants
Do you need more information? Just contact us