DNP3 SCADA

Solu­tions for sub­sta­tion automa­tion in real time

DNP3.0 SCADA Software

The DNP3.0 pro­to­col is com­mon­ly used to trans­mit local­ly col­lect­ed data to SCADA sys­tems and con­trol cen­ters. How­ev­er, a lot of sub­sta­tion devices and equip­ment can only com­mu­ni­cate with oth­er pro­to­cols such as Mod­bus or IEC 61850. 

Our advanced SCADA sys­tem iCon­trol acts as a bridge between intel­li­gent devices on the sub­sta­tion lev­el and 2nd lev­el mas­ter sta­tions com­mu­ni­cat­ing via DNP3. It is adapt­able to any appli­ca­tion require­ments, from small MV sub­sta­tions and pow­er plants to large-scale HV sub­sta­tions and entire dis­tri­b­u­tion grids, always work­ing in the same environment.

It’s intu­itive con­fig­u­ra­tion envi­ron­ment and HMI com­bined with inte­grat­ed PLC automa­tion capa­bil­i­ties make at an easy-to-use plat­form for both com­plex and sim­ple sub­sta­tion automa­tion projects.

It unites impor­tant func­tion­al­i­ties for elec­tric­i­ty dis­tri­b­u­tion net­works, such as sin­gle-line dia­grams, play­back event repro­duc­tion, qual­i­ty of ser­vice cal­cu­la­tions (SAIDI & SAIFI ratios), tem­plates or SQL data­base and alarm/event man­age­ment. It was specif­i­cal­ly designed for the ener­gy sec­tor, allow­ing us to cre­ate a sim­ple and intu­itive inter­face for the oper­a­tion and con­fig­u­ra­tion of sub­sta­tion automa­tion sys­tems (SAS) and dis­tri­b­u­tion con­trol centers.

Fur­ther­more, iCon­trol SCADA can be accessed online via web brows­er and send auto­mat­ed reports via PDF or E‑Mail to facil­i­tate com­mu­ni­ca­tions between dif­fer­ent actors and operators. 

 

DNP3 SCADA Functions and Applications

MV Grid Automation

MV Grid & Substation Automation Platform

  • Con­trol Cen­ter Plat­form for Util­i­ties and DSOs
  • SCADA & gate­way sys­tem for MV substations
N

Auto­mat­ic flow or volt­age based line coloring

N

Qual­i­ty of ser­vice (SAIFI/ SAIDI) calculations

N

Live, remote and web based data access

N

Work­sta­tion for engi­neer­ing projects

N

Full gate­way capabilities

HV Sub­sta­tion Automation

HV Substation Automation SCADA

  • Advanced HV Sub­sta­tion Automa­tion SCADA
  • Local sub­sta­tion HMI 
  • Web SCADA
N

Auto­mat­ic flow or volt­age based line coloring

N

GOOSE & MMS IEC 61850 communications

N

Full gate­way and PLC capabilities

N

Advanced Redun­dan­cy & Time Synchronization

Highlights

  • Secured, high-per­for­mance and easy-to-use SCADA HMI con­trol soft­ware with all rec­om­mend­ed fea­tures for elec­tric­i­ty dis­tri­b­u­tion sys­tems and beyond
  • iCon­trol’s open approach is adapt­able to any net­work schema or topol­o­gy, designed to fit all lev­els, from sim­ple stand­alone sys­tems to com­plex redun­dant archi­tec­tures with remote clients and SQL data storage
  • iCon­trol SCADA can be eas­i­ly adapt­ed to user or appli­ca­tion pref­er­ences, includ­ing self-defined func­tions, math­e­mat­i­cal expes­sions, botons, graph­i­cal data illus­tra­tions, alarm types and windows
  • Ana­lyze and visu­al­ize real-time and his­toric data at all ends of the pow­er sys­tem on a sin­gle plat­form or eas­i­ly trans­fer the data to a 3rd par­ty data­base for exter­nal analyses
  • Gen­er­ate cus­tomized reports, trig­gered peri­od­i­cal­ly or by any kind of event/alarm
  • Man­age mul­ti­ple com­mu­ni­ca­tion pro­to­cols at the same time – from sim­ple Mod­bus to IEC 61850 (MMS & GOOSE), both mas­ter and slave, includ­ing com­mon pro­to­cols for con­trol cen­ter com­mu­ni­ca­tion, such as IEC 60870–5‑104/101, DNP3.0 or OPC UA
  • Access the SCADA in real-time from any­where via inter­net brows­er using the iCon­trol web view­er, block­ing any unwanted/dangerous activ­i­ty with inte­grat­ed safe­ty measures
  • Ben­e­fit from state-of-the-art func­tion­al­i­ties for elec­tri­cal dis­tri­b­u­tion net­works, includ­ing high-pre­ci­sion time-syn­chro­niza­tion, auto­mat­ic line col­or­ing and PLC programming.

iControl as Substation HMI, local SCADA and Gateway

Exam­plary schema of a sub­sta­tion with two redun­dant Eth­er­net LANs using iCon­trol as sub­sta­tion SCADA and gateway

DNP3 in Our Protocol Stack

iControl Download

Please fill out the reg­is­tra­tion form below to down­load the iCon­trol SCADA Demo

    I have read and accept the Pri­va­cy Pol­i­cy*

    Solar PV Plants Remote Monitoring and Control Center

    Solar PV Plants Remote Monitoring and Control Center

    Substation Automation System with Modbus RTU, IEC 104 and DNP3 (Thailand)

    Substation Automation System with Modbus RTU, IEC 104 and DNP3 (Thailand)

    IEC 61850 HV Pilot Substation with IEC 104 Mapping (India)

    IEC 61850 HV Pilot Substation with IEC 104 Mapping (India)

    IEC 61850 SCADA and RTU in Pilot HV Substation (Italy)

    IEC 61850 SCADA and RTU in Pilot HV Substation (Italy)

    Communications Control Center (Spain)

    Communications Control Center (Spain)

    Public Lighting Control Center with Modbus and IEC 104 (Spain)

    Public Lighting Control Center with Modbus and IEC 104 (Spain)

    SAS Interconnecting Multivendor Control Centers — DNP3, Modbus RTU & IEC 104 (Thailand)

    SAS Interconnecting Multivendor Control Centers — DNP3, Modbus RTU & IEC 104 (Thailand)

    HV Substation Automation System (Thailand)

    HV Substation Automation System (Thailand)

    HV Substation Automation SCADA with Redundancy (Thailand)

    HV Substation Automation SCADA with Redundancy (Thailand)

    HV Substation with Interoperable DNP3.0 SCADA (Argentina)

    HV Substation with Interoperable DNP3.0 SCADA (Argentina)

    MV Grid Distribution Control Center with IEC 61850 (Spain)

    MV Grid Distribution Control Center with IEC 61850 (Spain)

    Medium Voltage Grid Distribution Control Center (Argentina)

    Medium Voltage Grid Distribution Control Center (Argentina)

    High Voltage Substation RTU & SCADA (Middle East)

    High Voltage Substation RTU & SCADA (Middle East)

    iControl SCADA

    High-per­for­mance SCADA for the visu­al­iza­tion and con­trol of sub­sta­tion data. It is able to run either in client/server or stand­alone modes, pro­vid­ing advanced func­tion­al­i­ties such as hot-stand­by redun­dan­cy, auto­mat­ic line col­or­ing, events noti­fi­ca­tion (via e‑mail and sms), SQL log­ging, and reports generation.

    Do you need more information?

    We are hap­py to assist you!

     

    +34 93 502 79 84

    Mon­day to Friday

    08:00h to 17:00h

    Cen­tral Euro­pean Time

      I have read and accept the Pri­va­cy Pol­i­cy*

      All per­son­al data that you sub­mit us via this form will be processed by Data Con­troller IGRID, S.L. and saved into CONTACTS pro­cess­ing activ­i­tie, with the pur­pose of answer­ing your inquiry, via email or phone, and for a lat­er fol­low up. Pro­cess­ing shall be law­ful because you give us your con­sent for these spe­cif­ic pur­pos­es. Your per­son­al data will not be dis­closed to third par­ties unless forced by law. You have right to access to, rec­ti­fy, or delete your per­son­al data, and oth­er rights as explained in our Pri­va­cy Policy